FanControl v162 instal the new version for iphone

A working debug build is included in fancontrol/Debug, but it will need to be run each boot, or added to run at startup. The default fan profile that is included is a silent one, with the fans only coming on at 60c. This can be changed by editing tpfancontrol.ini in the fancontrol/Debug. Many other options can be changed in the config file as well. I used Visual Studio 2017 Community to build, earlier/later versions may work as well but are not tested.

The easiest way to run TPFC at startup is: To avoid errors, either install tvicport manually or install the original version of TPFanControl found here, and run the dual-fan version instead of the original version.

Right-click on fancontrol.exe and select copy.

Press Windows-r or search for run in the start menu.

Right click in the window that opens and select paste shortcut.

Note: this won’t start TPFC until you reboot.I see the reading, but it is incorrect. exe & choose 'Sensor Only' & it takes a very long time for detection. I choose 'Continue' & it reads 963 rpm, when fan is at 0 rpm, then quit & start again & choose 'Disable Sensor'. I am running the HP Fan Control as mentioned earlier. Waited until fan came on at around 3000rpm & your reading is in agreement with HPFC reading. When HPFC goes to 0, you're stuck at 963.

Your max reading is 7021rpm (clearly wrong!), min reading is 963. They will return to 0% if the temperature is 65 C or less.Looks like an offset (480) & a scaling error (2x), but not all the time. For example, in my curves, the fans will always spin at 100% speed if the temperature is 95 C. When the minimum or maximum temperature is reached for both of these cards, their corresponding speed will trigger. Next, you need to set a minimum speed and a maximum speed.

Basically, you're telling the app, 'I want my temperature to never exceed X, but it's okay if it never goes below Y.' Both cards require you to set a minimum and a maximum temperature. First, let's focus on the Target and Linear cards since they're very similar to each other. I've already configured these cards to my personal preference. For case fans, you can use the hottest motherboard, CPU, or GPU sensor as it doesn't matter too much. Before you do anything, you need to select a temperature source.įor CPU fans, use one of your CPUrelated sensors (pick the one with the highest temperature to be safe).

FanControl v162 instal the new version for iphone